TEL:+86.13567100060 |Retail Store|  |info@kulon.com

Switching Power Supply

Home/Switching Power Supply
※NEW PRODUCT
AC/DC > Enclosed- Enclosed Switching Power Supply
>> G3 Series
Wattage :15W~150W
Features :

Miniature size, non-PFC

High reliability, 5G vibration, 70℃ operation

300VAC input surge, all using 105℃ capacitors

Suitable for critical applications

2 outputs are isolated for RID series

Model
Single:
RS-15 / RS-25 / RS-35 / RS-50 / RS-75 / RS-100 / RS-150
Dual:
RD-35 / RD-50 / RD-65 / RD-85 / RD-125 / RID-50 / RID-65 / RID-85 / RID-125
Triple:
RT-50 / RT-65 / RT-85 / RT-125
Dual:
RQ-50 / RQ-65 / RQ-85 / RQ-125
>> NE Series
Wattage :15W~350W
Features :

Economical non-PFC models

Miniature size with complete protections

Economical models with complete safety certificates

Model
Dual:
NED-35 / NED-50 / NED-75 / NED-100
Triple:
NET-35 / NET-50 / NET-75
>> LRS Series
Wattage :35W~350W
Features :

Non-PFC, complete protections

Most economical models with safety certificates

No load power consumption: 0.2W~0.75W

Ultra compact and 1U low profile

Operating altitude up to 5000 meters

Compliance to IEC/EN60335-1(PD3) and IEC/EN61558-1, -2-16 for household appliances (35~150W)

Model
>> SE Series
Wattage :100W~1500W
Features :

Non-PFC, complete protections

Economical medium to high power models with safety certificate

Model
Single:
SE-100 / SE-200 / SE-350 / SE-450 / SE-600 / SE-1000 / SE-1500
>> PFC Series
Wattage :75W~750W
Features :

Built-in active PFC function

Full range input, complete functions

Model
Triple:
TP-75 / TP-100 / TP-150 / TP-7503
Quad:
QP-100 / QP-150 / QP-200 / QP-320 / QP-375
>> Moving Sign Series
Wattage :150W~400W
Features :

Built-in active PFC function (HSP/HDP series)

Output voltage: 2.5V, 2.8V, 3.6V, 3.8V, 4.2V, 5V for HSP series 4.2V, 5V for HSN series 2.8V, 4.2V, 5V for NEL series 24V, 36V, 48V for ERP-350 series 2.8V / 3.8V for HDP series

Suitable for high efficiency moving sign applications

Conformal coating (HSP/HDP/NEL/HSN series)

Semi-potted and design against rain splash (ERP-350)

Model
Dual:
HDP-190 / HDP-240
>> U-Bracket
Wattage :150W~500W
Features :

1U low profile

Built-in active PFC function

Fanless design

Model
Single:
USP-150 / USP-225 / USP-350 / USP-500
>> RSP-75~500 Series
Wattage :75W~500W
Features :

1U Low profile with active PFC function: 75W~320W: 30 mm, 500W: 40.5 mm

Built-in constant current limiting circuit (RSP-75/100/150)

Built-in remote ON/OFF control (RSP-75/100/150/500)

Built-in remote sense (RSP-500 only)

Model
>> G5 Series
Wattage :75W~600W
Features :

Built-in active PFC function

High efficiency, no load power consumption <0.5W~0.75W

5 years warranty

>> MSP Series
Wattage :100W~600W
Features :

Medical enclosed type, built-in active PFC

Medical safety approved (MOOP level)

High efficiency, no load power consumption<0.5W~0.8W

5 years warranty

Model
>> HEP Series
Wattage :100W~600W
Features :

Universal AC input / Full range 90~305VAC with PFC function

High efficiency, fanless design with extremely low noise (96% efficiency for HEP-600)

Wide working temperature range -55~+70℃ under free air convection cooling (-40~+70℃ for HEP-600)

Rugged metal case with IP65 design (IP68 option available), withstand 10G vibration

High operating altitude up to 5000 meters

Suitable for high/low temperature, high dust, high moisture, high vibration, high salt outdoor or harsh environment

6 years warranty

Model
AC/DC > DIN Rail- DIN Rail Power Supply
>> HDR Series
Wattage :15W~100W
Features :

 Plastic case,step shape

1∅, full rang input

Compact size,1SU~3SU width (DIN EN43880)

Isolation class II

DC output voltage adjustable

No load power consumption <0.3W

Assemble on industrial rail TS-35 / 7.5 or 15

Suitable for building automation and control of household appliance

Model
Single:
HDR-15 / HDR-30 / HDR-60 / HDR-100
>> MDR Series
Wattage :10W~96W
Features :

No load power consumption<0.75W (1W for MDR-100)

Assemble on industrial rail TS-35 / 7.5 or 15

Built-in active PFC and over temperature protection (MDR-100)

DC OK signal output (MDR-10/20)

DC OK relay contact (MDR-40/60/100)

Class I, Div 2 Hazardous Locations T4 (MDR-40/60)

Model
Single:
MDR-10 / MDR-20 / MDR-40 / MDR-60 / MDR-100
>> DRA Series
Wattage :40W~60W
Features :

Io can be adjusted 10~100% by 1~10VDC, PWM signal or resistance

Assemble on industrial rail TS-35 / 7.5 or 15

Suitable for machine vision inspection system and plant cultivation applications

Model
Single:
DRA-40 / DRA-60
>> DR Series
Wattage :15W~100W
Features :

Isolation class II

No load power consumption <0.5W (DR-15)

No load power consumption <1W (DR-100)

Assemble on industrial rail TS-35 / 7.5 or 15

Suitable for building automation and control of household appliance

Model
Single:
DR-15 / DR-30 / DR-60 / DR-100
>> DR/DRP Series
Wattage :45W~480W
Features :

Fanless design

Models over 240W(includes) built-in PFC function

Model
1-phase:
DR-45 / DR-75 / DR-120 / DRP-240 / DRP-480 / DRP-480S
>> DRH/DRT Series
Wattage :120W~960W
Features :

Fanless design

Three phase or high input voltage range (340~550VAC)

Model
2-phase:
DRH-120
3-phase:
DRT-240 / DRT-480 / DRT-960
>> EDR Series
Wattage :75W~150W
Features :

Model width: 75W: 32mm 120W/150W: 40mm

EMC standards: EN55022 class A

Low cost and slim design

Assemble on industrial rail TS-35 / 7.5 or 15

2 years warranty

Model
Single:
EDR-75 / EDR-120 / EDR-150
>> NDR Series
Wattage :75W~480W
Features :

Model width: 75W: 32mm 120W/150W: 40mm 240W: 63mm 480W: 85.5mm

EMC standards: EN55022 class B

Economical and slim design

Assemble on industrial rail TS-35 / 7.5 or 15

3 years warranty

Model
Single:
NDR-75 / NDR-120 / NDR-240 / NDR-480
>> SDR Series
Wattage :75W~960W
Features :

Slim design and high efficiency up to 94%

Built-in active PFC function (except for SDR-75)

Assemble on industrial rail TS-35 / 7.5 or 15

Built-in DC OK relay contact (except for SDR-75)

150% peak load capability (130% for SDR-960)

Model
Single:
SDR-75 / SDR-120 / SDR-240 / SDR-480 / SDR-960
>> TDR Series
Wattage :960W
Features :

Slim design and 340~550VAC high input range (three phase)

High efficiency up to 94.5%

Built-in active PFC function

Assemble on industrial rail TS-35 / 7.5 or 15

Built-in DC OK relay contact

Model
3-phase:
TDR-480 / TDR-960
>> WDR Series
Wattage :120W~480W
Features :

Slim design and 180~550VAC wide input range (single and two phase)

High efficiency up to 93%

Built-in active PFC function (240W & 480W)

Assemble on industrial rail TS-35 / 7.5 or 15

Built-in DC OK relay contact

Model
>> KNX Power
Wattage :20W
Features :

EIB/KNX power supply with integrated choke

Compact size with 3SU (52.5mm) width

180~264VAC input

No load power consumption <0.5W

Isolation Class I

Assemble on industrial rail TS-35 / 7.5 or 15

Model
Single:
KNX-20E
>> Peripheral
Wattage :NA
Features :

20A redundant module & 40A DC UPS module

Model
Redundant:
    DR-RDN20
UPS:
DR-UPS40
AC/DC > Open Frame- Open Frame Switching Power Supply
>> Industrial Green PCB Type
Wattage :15W~300W
Features :

Compact size, 3" x 2" for EPS-45S/65S; 4" x 2" for EPS-120

Compact PCB type, non-PFC for small wattage models (15W~65W)

No load power consumption <0.3W~0.5W

Suitable for ErP regulated end systems

Model
EPS Series:
EPS-15 / EPS-25 / EPS-35 / EPS-45 / EPS-45S / EPS-65 / EPS-65S / ELP-75 / EPS-120
EPP Series:
EPP-100 / EPP-150 / EPP-200 / EPP-300 / EPP-400
>> Industrial On Board Type
Wattage :3W~60W
Features :

Assemble on the main PCB of the system

No load power consumption<0.1W (<0.075W for IRM-03)

Miniature size, high power density

Isolations Class II

Comply with EN55022 class B without any additional components

PCB mounting style and SMD type for IRM-03

Model
>> Industrial PCB Type
Wattage :5W~250W
Features :

PCB type, non-PFC for small wattage models

Multiple form factors for different installations: 7”* 4.25”, 5”* 3”, 4”* 2”, slim type

Model
Single:
PS-05 / PS-15 / PS-25 / PS-35 / PS-45 / PS-65 / PPS-125 / ASP-150 / PPS-200
Dual:
LPS-50 / LPS-75 / LPS-100 / LPP-100 / LPP-150
Triple:
PT-45 / PT-4503 / PT-65 / PT-6503 / RPT-65 / PPT-125
Quad:
PQ-100 / PPQ-100 / PPQ-1003
>> Medical On Board Type
Wattage :5W~20W
Features :

Assemble on the main PCB of the system

Medical safety approved (2xMOPP)

Suitable for BF application with appropriate system consideration

NFM – PCB type ; PM – encapsulated type

Model
PM Series:
PM-05 / PM-10 / PM-15 / PM-20 / MPM-05 / MPM-10 / MPM-15 / MPM-20 / MPM-30
NFM Series:
NFM-05 / NFM-10 / NFM-15 / NFM-20 / MFM-05 / MFM-10 / MFM-15 / MFM-20 / MFM-30
>> Medical PCB Type
Wattage :30W~300W
Features :

Compact size, 3"x2" for RPS-30/45/65; 4"x2" for RPS-120/200

PCB type, non-PFC for small wattage models

Medical safety approved (2xMOPP)

Low leakage current

Suitable for BF application with appropriate system consideration for selected models

Model
Triple:
MPT-45 / MPT-65 / MPT-200 / RPT-60 / RPT-75 / RPT-160
Quad:
MPQ-200
AC/DC > Specific Purpose- Specific Purpose Power Supply
>> ATX PC Power
Wattage :250W~300W
Features :

Low profile for 1U/2U for rack system

Suitable for industrial PC applications

Model
>> Security DIN Series
Wattage :40W~100W
Features :

With UPS function (need external batteries)

Suitable for security industry or battery backup systems

Assemble on industrial rail TS-35 / 7.5 or 15

Model
>> Security Enclosed Series
Wattage :35W~155W
Features :

With UPS function (need external batteries) for AD/ADD series

Suitable for security industry or battery backup systems

Model
Green :
SCP-35 / SCP-50 / SCP-75
Single:
AD-55 / ADS-55 / AD-155 / ADS-155
Dual:
ADD-55 / ADD-155
>> Security PCB Series
Wattage :35W~160W
Features :

With UPS function (need external batteries)

Suitable for security industry or battery backup systems

Built-in active PFC function (PSC-160)

Case available

Model
AC/DC > PV Power- Programmable Power Supply
>> DPU Series
Wattage :3200W
Features :

Universal AC Input/ Full Range

Built-in Active PFC

High efficiency up to 94.5%

air cooling by built-in DC fan

Output voltage and constant current level programmable

Built-in OR-ing FET, support hot swap (hot) plug function

Protection: Short Circuit/ Overload / Over voltage/ Over temperature

Optional conformal coating

Safety approval: UL/TUV/EAC/CE/CB

5 years warranty

Model
Single:
DPU-3200
>> SPV Series
Wattage :150W~1500W
Features :

Built-in active PFC function

Output voltage programmable from 20~110%

Built-in current sharing (SPV-1500)

Model
Single:
SPV-150 / SPV-300 / SPV-1500
>> RST Series
Wattage :5000W~10000W
Features :

Single output power supply with 5000W / 10000W high wattage

3 phase input:3-wire / △196~305VAC or 4-wire / Y340~530VAC

Built-in active PFC function

High efficiency up to 91%

20000W with built-in parallel (active current sharing) function

Output voltage and constant current level programmable

5 years warranty

Model
Single:
RST-5000 / RST-10000
>> RSP-750~3000 Series
Wattage :750W~3000W
Features :

Programmable high power with active PFC function

Output voltage programmable

Constant current level Icc programmable (RSP-750/1600 only)

1U low profile (41mm) : RSP-750/1000/1600/2000,
2U profile : RSP-1500/2400/3000

Built-in current sharing (except RSP-750)

5 years warranty

AC/DC > Rack Power- 19" Rack Power Unit
>> RCP Series
Wattage :1000W~18000W
Features :

Complete rack mountable front end solution: rectifier and charger

1U low profile

19 inch rack shelf available

Model
Power:
RCP-1000 / RCP-1600 / RCP-2000
Charger:
RCB-1600
Rack:
RCP-1U / RHP-1U / RKP-1U
Controller & Monitor:
     RCP-MU /      RKP-CMU1
>> DRP Series
Wattage :3200W
Features :

Complete rack mountable front end solution: rectifier and charger

1U low profile

19 inch rack shelf available

Model
Power:
DRP-3200
Shelf:
DHP-1UT
Charger:
DBR-3200
AC/DC > Modular- Configurable Power Supply
>> MP Series
Wattage :450W/650W/1000W
Features :

Free configuration, highly flexible, customized standard PSU

Cover all output voltages from 1.6~53VDC

Built-in active PFC

Suitable for multi-output, complex equipment or systems

Model
MP450 / MP650 / MP1K0
>> NMP Series
Wattage :650W/1200W
Features :

Configurable/customizable/flexible power supply

Built-in active PFC function

4 slot output for NMP650

6 slot output for NMP1K2

Model
NMP650 / NMP1K2
AC/DC > LED Driver- LED Driver
>> AP Series
Wattage :8W~35W
Features :

90~264VAC input

Rectangular plastic case with IP42 level

Class II design, without FG

Low cost, small and compact size

Constant voltage mode for APV series

Constant current mode for APC series

Suitable for indoor LED lighting and moving sign applications

Model
C.V.:
APV-8 / APV-12 / APV-16 / APV-25 / APV-35
C.C.:
APC-8 / APC-12 / APC-16 / APC-25 / APC-35
>> AP-E Series
Wattage :8W~16W
Features :

180~264VAC input only

Rectangular plastic case with IP42 level

Class II design, without FG

Low cost, small and compact size

Constant voltage mode for APV-E series

Constant current mode for APC-E series

Suitable for indoor LED lighting and moving sign applications

Model
C.V.:
APV-8E / APV-12E / APV-16E
C.C.:
APC-8E / APC-12E / APC-16E
>> CEN Series
Wattage :60W~96W
Features :

90~295VAC input, built-in active PFC function

Metal case, IP66 design for indoor or outdoor installations

User adjustable output voltage and current level

Suitable for LED street lighting and outdoor LED lighting applications

Model
Single:
CEN-60 / CEN-75 / CEN-100
>> CLG Series
Wattage :60W~150W
Features :

90~295VAC input, built-in active PFC function

Metal case, IP67/IP65 design for indoor or outdoor installations

Output current adjustable through output cable or internal potentiometer (CLG-150)

Suitable for LED street lighting, outdoor LED lighting and moving sign applications

Model
Single:
CLG-60 / CLG-100 / CLG-150
>> ELG Series
Wattage :75W~240W
Features :

180~305VAC input range

Built-in active PFC function

No load power consumption <0.5W

Protections: Short circuit / Over current / Over voltage / Over temperature

Cooling by free air convection

Metal case, IP67/IP65 design for indoor or outdoor installations

Built-in 3 in 1 dimming function (0~10Vdc or 10V PWM signal or resistance) for B-Type

Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries

Suitable for LED street lighting and outdoor LED lighting

5 years warranty

Model
Single:
ELG-75 / ELG-100 / ELG-150 / ELG-200 / ELG-240
ELG-U:
ELG-100U / ELG-150U
>> ELG-C Series
Wattage :75W~240W
Features :

180~305VAC input range

Constant current (C.C.) output

Built-in active PFC function

No load power consumption <0.5W

Protections: Short circuit / Over voltage / Over temperature

Metal case, IP67/IP65 design for indoor or outdoor installations

Built-in 3 in 1 dimming function (0~10Vdc or 10V PWM signal or resistance) for B-Type

Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries

Suitable for LED street lighting and outdoor LED lighting

5 years warranty

>> ELN Series
Wattage :30W~60W
Features :

90~264VAC input

Fully isolated plastic case with IP64 level

Optional dimming function: 1.1~10VDC(D type) or PWM(P type) controlled

Suitable for economical LED lighting and moving sign applications

Model
Single:
ELN-30 / ELN-60
>> FDL Series
Wattage :65W
Features :

180~295VAC input range

Built-in active PFC function

Constant current design

Fully encapsulated with IP65 level

No load power consumption <0.5W

3 years warranty

Model
Single:
FDL-65
C.P.:
FDLC-80 / FDLC-100
>> GSC Series
Wattage :18W~40W
Features :

90~277VAC input, built-in active PFC function

Constant current mode

Fully isolated plastic case with IP40 design

Class II design, without FG

IEC320-C8 inlet for B type, 2 pole EURO plug for E type

No load power consumption<0.15W

Suitable for indoor LED lighting

Model
IEC320-C8:
    GSC18B / GSC25B / GSC40B
EURO 2Pin:
    GSC18E / GSC25E / GSC40E
>> HBG(P) Series
Wattage :60W~240W
Features :

90~305VAC input, built-in active PFC function [90~295VAC for HBG-60(P)]

Circular shape design: HBG-60: plastic case, HBG-100/160/240: metal case HBG-60P/100P/160P/240P:PCB type

IP67/IP65 design for indoor or outdoor installations for HBG-100/160/240

Built-in 3 in 1 dimming function (1~10VDC, PWM signal, or resistance) for HBG-100(P)/160(P)/240(P) B type

Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (HBG-100/160 only)

Suitable for LED high/low bay lighting, stage lighting and spot lighting

5 years warranty

>> HLG Series
Wattage :40W~600W
Features :

90~305VAC input, built-in active PFC function

96% high efficiency

Metal case, IP67/IP65 design for indoor or outdoor installations

Built-in 3 in 1 dimming function (1~10VDC, PWM signal or resistance) for B type

Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries

Suitable for LED street lighting, outdoor LED lighting and general outdoor applications with high IP requirement

IP68/-55℃ startup/10G vibration options available (Please contact MEAN WELL for details)

7 years warranty

>> HLG-C Series
Wattage :70W~320W
Features :

90~305VAC input, built-in active PFC function

Constant current output with high output voltage >60VDC

Metal case, IP67/IP65 design for indoor or outdoor installations

Built-in 3 in 1 dimming function (0 or 1~10VDC, PWM signal, or resistance) for B type

Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (HLG-240H-C/320H-C only)

Suitable for LED street lighting and outdoor LED lighting

7 years warranty

>> HSG Series
Wattage :70W
Features :

90~305VAC input, built-in active PFC function

Rectangular metal case

IP65 design for indoor or outdoor installations

Model
Single:
HSG-70
>> HVG(C) Series
Wattage :65W~320W
Features :

Wide input range 180~528VAC

Metal case, IP67/IP65 design for indoor or outdoor installations

Built-in active PFC function

Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (except for HVG-65 and HVGC-65/100)

Suitable for LED street lighting and outdoor LED lighting applications

5 years warranty

>> LDB-L/LW Series
Wattage :300/350/500/600mA
Features :

Constant current DC/DC buck-boost LED driver

High efficiency up to 91%

Comply with EN55015 and FCC part 15 without additional input filter and capacitors

PWM dimming and remote ON/OFF control

Suitable for buck-boost type lighting systems (additional mother board is required)

Pin, wire style for choice

Model
Single:
LDB-L
>> LDH Series
Wattage :350/500/700/1050mA
Features :

Constant current output DC/DC step-up LED driver

High efficiency up to 95%

Comply with EN55015 without additional any components

PWM+analog dimming and remote ON/OFF control

Suitable for boost type lighting systems (Additional mother board is required)

Pin, wire style for choice

Model
Single:
LDH-45(DA)
>> LP Series
Wattage :18W~150W
Features :

90~264VAC input [90~132VAC for LPL(C)-18, 180~264VAC for LPH(C)-18

Slim plastic case with IP67 level

Economical design

Withstand 300VAC surge input for 5 seconds (LPV/C-20/35/60/100)

-30~70℃ wide operation range

Suitable for economical LED lighting and moving sign applications

Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (LPVL-150 only)

>> OWA Series
Wattage :60W~120W
Features :

IP67 design for power body

90~264VAC input (180~264VAC input for OWA-120E)

No load power consumption <0.15W

Energy efficiency Level VI

E-Type: meet CoC Version 5 (OWA-60E/90E); comply with EU ErP U-Type: comply with EISA 2007/DoE and NRCan

Class II design, without FG

2 pole USA plug (U type)/ EURO plug (E type)

5 years warranty

Model
USA 2Pin:
OWA-60U / OWA-90U / OWA-120U
EURO 2Pin:
OWA-60E / OWA-90E / OWA-120E
>> PCD Series
Wattage :16W~60W
Features :

16W/25W: 90~135VAC or 180~295VAC 40W/60W: 180~295VAC

AC phase-cut dimming, work with leading and trailing edge TRIAC dimmers

Fully isolated plastic case with IP42 level

Built-in active PFC function

Class II design, without FG

Constant current mode

Suitable for indoor LED lighting

Model
Single:
PCD-16 / PCD-25 / PCD-40 / PCD-60
>> PLD Series
Wattage :16W~60W
Features :

16W: 90~135VAC or 180~295VAC 25W: 90~295VAC 40W/60W: 180~295VAC

Built-in active PFC function

Fully isolated plastic case with IP42 level

Class II design, without FG

Constant current mode

Suitable for indoor LED lighting

Model
Single:
PLD-16 / PLD-25 / PLD-40 / PLD-60
>> PLM Series
Wattage :12W~40W
Features :

110~295VAC input (180~295VAC input for E type)

Built-in active PFC function

Fully isolated plastic case with IP30 level

Class II design, without FG

Push terminal I/O

Constant current mode

No load power consumption<0.5W

Suitable for indoor LED lighting

Model
Single:
PLM-12 / PLM-25 / PLM-40
>> ULP Series
Wattage :150W
Features :

90~295VAC input, built-in active PFC function

High efficiency up to 93%

U-bracket low profile: 33mm, suitable for built-in LED lighting systems

Model
Single:
ULP-150
>> ODL Series
Wattage :45W~65W
Features :

Constant current output mode (ODLC Series)

Constant voltage output mode (ODLV Series)

Flicker free design( ODLC Series)

Built-in active PFC function

Built-in 2 in 1 dimming function (0~10VDC or PWM signal, dim-to-off )

Suitable for indoor LED lighting applications

Model
C.C :
ODLV-45 / ODLV-65
>> LDD-L Series
Wattage :300/350/500/600/700mA
Features :

Constant current output DC/DC step-down converter

High efficiency up to 97%

Comply with EN55015 and FCC part15 without additional input filter and capacitors

PWM dimming and remote ON/OFF control

Protections: Short circuit / Over temperature

Cooling by free air convection

Fully encapsulated with IP67 level for pin and wire style

Suitable for driving illumination LED

3 years warranty

Model
C.C :
LDD-L
>> LDD-H Series
Wattage :300/350/500/600/700mA
Features :

Constant current output DC/DC step-down converter

High efficiency up to 97%

Comply with EN55015 and FCC part15 without additional input filter and capacitors

PWM dimming and remote ON/OFF control

Protections: Short circuit / Over temperature

Cooling by free air convection

Fully encapsulated with IP67 level for pin and wire style

Suitable for driving illumination LED

3 years warranty

Model
C.C :
LDD-H / LDD-H-DA
>> LDC Series
Wattage :35W~80W
Features :

Constant power output

Flicker free design

3 in 1 dimming:0~10Vdc、PMW signal or resistance

Built-in active PFC function

No load power consumption <0.5W

working temperature: -25~+90℃

Protections: short circuit /

UL/ENEC/TUV/CCC/CB/CE certified

5 years warranty

Model
C.C :
LDC-35 / LDC-55 / LDC-80
>> LPF Series
Wattage :16W~90W
Features :

90~305VAC input, built-in active PFC function

Fully isolated plastic case with IP67 level (16W optional)

Class II design, without FG

Built-in 3 in 1 dimming function for D type (1~10VDC, PWM signal or resistance)

Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (LPF-90/90D)

Suitable for LED lighting and moving sign applications

5 years warranty

Model
3 in 1 Dimming:
LPF-16D / LPF-25D / LPF-40D / LPF-60D / LPFH-60D / LPF-90D
>> NPF Series
Wattage :40W~120W
Features :

90~305VAC input, built-in active PFC function

Fully isolated plastic case with IP67 level

Class II design, without FG

No load power consumption<0.15W (<0.5W for D type)

Built-in 3 in 1 dimming function (0~10VDC, PWM signal or resistance) for D type

Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (NPF-40(D)/-60(D)/-120(D) only)

Suitable for LED lighting and moving sign applications

5 years warranty

Model
C.V.+C.C.:
    NPF-40 / NPF-60 / NPF-90 / NPF-120
3 in 1 Dimming:
NPF-40D / NPF-60D / NPF-90D / NPF-120D
>> PWM Series
Wattage :40W~120W
Features :

90~305VAC input, built-in active PFC function

Fully isolated plastic case with IP67 level

Constant voltage PWM style output

Class II design, without FG

No load power consumption<0.5W

Built-in 3 in 1 dimming function (0~10VDC, PWM signal or resistance)

Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (PWM-40/60/120 only)

Suitable for LED strip lighting

5 years warranty

Model
Single:
PWM-40 / PWM-60 / PWM-90 / PWM-120
>> PLC Series
Wattage :30W~96W
Features :

90~264VAC input, built-in active PFC function

Fully isolated plastic case with screw terminal style of I/O

Suitable for indoor LED lighting and moving sign applications

Model
Single:
PLC-30 / PLC-45 / PLC-60 / PLC-100
>> PLN Series
Wattage :20W~96W
Features :

90~295VAC input (90~277VAC for PLN-20), built-in active PFC function

Fully isolated plastic case with IP64 level

Suitable for indoor LED lighting and moving sign applications

Model
Single:
PLN-20 / PLN-30 / PLN-45 / PLN-60 / PLN-100
>> HLN Series
Wattage :40W~80W
Features :

90~305VAC input, built-in active PFC function

Fully isolated plastic case with IP64 level

Built-in 3 in 1 dimming function (1~10VDC, PWM signal or resistance) for B type

User adjustable output voltage and current level for A type

Suitable for indoor LED lighting and moving sign applications

Model
Single:
HLN-40H / HLN-60H / HLN-80H
>> LCM Series
Wattage :25W~60W
Features :

180~295VAC input for 40W/60W, 180~277VAC input for 25W

Constant current mode

Built-in active PFC function

Multiple-stage output current level selectable by DIP switch

Built-in 3 in 1 dimming function for non DA type (0~10VDC, PWM signal or resistance)

Built-in DALI interface and push dimming function for DA type

Suitable for indoor LED lighting applications

Model
3 in 1 Dimming:
LCM-25 / LCM-40 / LCM-60
DALI Dimming:
LCM-25DA / LCM-40DA / LCM-60DA
>> LCM-U Series
Wattage :40W~60W
Features :

90~132VAC input only

Constant current mode

Built-in active PFC function

Multiple-stage output current level selectable by DIP switch

Built-in 3 in 1 dimming function for non DA type (0~10VDC, PWM signal or resistance)

Built-in DALI interface and push dimming function for DA type

Suitable for indoor LED lighting applications

Model
3 in 1 Dimming:
LCM-40U / LCM-60U
DALI Dimming:
LCM-40UDA / LCM-60UDA
>> IDL Series
Wattage :45W~65W
Features :

Constant current output mode (IDLC Series)

Constant voltage output mode (IDLV Series)

Flicker free design (IDLC Series)

Built-in 2 in 1 dimming function (0~10VDC or PWM signal, dim-to-off )

Suitable for indoor LED lighting applications

Model
C.V.:
IDLV-25 / IDLV-45 / IDLV-65
>> PLP Series
Wattage :20W~60W
Features :

90~264VAC input (90~277VAC for PLP-20), built-in active PFC function

Suitable for built-in LED lighting systems

Model
Single:
PLP-20 / PLP-30 / PLP-45 / PLP-60
>> IDP Series
Wattage :45W~65W
Features :

Constant current output mode(IDPC Series)

Constant voltage output mode(IDPV Series)

Flicker free design(IDPC Series)

Built-in active PFC function

Built-in 2 in 1 dimming function (0~10VDC or PWM signal, dim-to-off )

Suitable for built-in LED lighting systems

Model
C.V:
IDPV-25 / IDPV-45 / IDPV-65
>> HLP Series
Wattage :40W~80W
Features :

90~305VAC input, built-in active PFC function

Built-in 3 in 1 dimming function (1~10VDC, PWM signal or resistance)

Suitable for built-in LED lighting systems

Model
Single:
HLP-40H / HLP-60H / HLP-80H
AC/DC > LED Accessory - LED Accessories
>> DAP-04
Wattage :NA
Features :

90~305VAC input

Convert DALI signal to PWM signal

4 DALI addressable output channels

Meet DALI standards(IEC62386-101,102,207)

Suitable to use along with MEAN WELL's AC/DC LED PSU with 3 in 1 dimming function

Model
DAP-04
>> RFP Series
Wattage :NA
Features :

RF wireless remote control

Adjustable brightness / color temperature / RGBW

Suitable for LED strips application

>> SDP-001
Wattage :NA
Features :

Smart timer dimming programmer

Model
SDP-001
>> SPD-20
Wattage :NA
Features :

20kA surge protection device

Type 2 component assemblies

Line to Ground & Line to Line protected

Suitable for surge protection of LED drivers

UL1449, TUV EN61643-11 approved

Model
SPD-20
AC/DC > Adaptor- External Switching Power Supply
>> Industrial Desktop (Level V)
Wattage :18W~280W
Features :

Energy efficiency level V (GS series)

No load power consumption <0.3W~0.5W

Comply with EISA 2007, NRCan, MEPS and ErP

Fanless design with 0~50oC working temperature

A type: Class I (with FG), equipped IEC320-C14; B type: Class II (without FG), equipped IEC320-C8

DC plug changeable (MOQ may be required)

2 years warranty

Model
Single:
GS18A / GS18B / GS25A / GS25B / GS40 / GS60 / GS90 / GS120 / GS160 / GS220 / GS280
Triple:
P25A / P25B / P50A
>> Industrial Desktop (Level VI)
Wattage :15W~280W
Features :

Energy efficiency Level VI

No load power consumption <0.075W~0.5W

Comply with EISA 2007/DoE, NRCan, MEPS, ErP and CoC Version 5

Fanless design with -30~+70oC working temperature

A type: Class I (with FG), equipped IEC320-C14 B type: Class II (without FG), equipped IEC320-C8

DC plug changeable (MOQ may be required)

3 years warranty

Model
Triple:
GP25A / GP25B / GP50A
>> Industrial Wall-mounted (Level V)
Wattage :12W~36W
Features :

Energy efficiency Level V

No load power consumption <0.3W~0.5W

Comply with EISA 2007, NRCan, MEPS and ErP

0~50oC working temperature

2 pole USA (U type) / EURO (E type) for GS series

DC plug changeable (MOQ may be required)

2 years warranty

Model
GS12U / GS12E / GS18U / GS18E / GS25U / GS25E / GS36U / GS36E
>> Industrial Wall-mounted (Level VI)
Wattage :5W~60W
Features :

Energy efficiency Level VI

No load power consumption <0.075W~0.15W

Comply with EISA 2007/DoE, NRCan, ErP and CoC Version 5

-30~+70oC working temperature

2 pole USA plug(U type) / EURO plug(E type) / Interchangeable type for GE series

Slim design for SGA series

DC plug changeable (MOQ may be required)

3 years warranty

Model
Interchangeable:
        GE12 / GE18 / GE24 / GE30
>> Medical Desktop
Wattage :18W~220W
Features :

Medical safety approved (2xMOPP), suitable for BF application with appropriate system consideration (B type)

Energy efficiency Level VI (GSM06/18/25/36/40/60 5~9V: Level V)

No load power consumption <0.1W~0.15W

Comply with EISA/DoE, NRCan, ErP and meet CoC Version 5

A type: Class I (with FG), equipped IEC320-C14; B type: Class II (without FG), equipped IEC320-C8

DC plug changeable (MOQ may be required)

3 years warranty

Model
Class I:
GSM40A / GSM60A / GSM90A / GSM120A / GSM160A / GSM220A
>> Medical Wall-mounted
Wattage :6W~36W
Features :

Medical safety approved (2xMOPP), suitable for BF applications with appropriate system consideration

Energy efficiency Level VI (GSM06 and GSM18/25/36 5~9V for Level V)

No load power consumption <0.075W~0.3W

Comply with EISA/DoE, NRCan, MEPS, ErP and meet CoC Version 5

2 pole USA plug(U type)/EURO plug(E type) for GSM series, interchangeable type for GEM series

DC plug changeable (MOQ may be required)

3 years warranty

Model
Interchangeable:
GEM12I / GEM18I / GEM30I / GEM40I / GEM60I
>> Moistureproof Desktop
Wattage :60W~120W
Features :

IP67 design for power body

90~264VAC input (180~264VAC input for OWA-120E)

No load power consumption <0.15W

Energy efficiency Level VI

E-Type: meet CoC Version 5 (OWA-60E/90E); comply with EU ErP U-Type: comply with EISA 2007/DoE and NRCan

Class II design, without FG

2 pole USA plug (U type)/EURO plug (E type)

5 years warranty

Model
USA 2Pin:
OWA-60U / OWA-90U / OWA-120U
EURO 2Pin:
OWA-60E / OWA-90E / OWA-120E
AC/DC > Charger- External Battery Charger
>> Adaptor Charger
Wattage :30W~330W
Features :

Portable battery charger

Green adaptor with charging function

Model
Green:
GC30B / GC30E / GC30U / GC120 / GC160 / GC220 / GC330
Single:
PA-120 / PB-120 / PB-230
>> Desktop Charger
Wattage :120W~240W
Features :

ESP: power supply,
ESC: charger for lead-acid batteries

AC input range selectable by switch

Model
Power:
ESP-120 / ESP-240
Charger:
ESC-120 / ESC-240
>> Stand-alone Charger
Wattage :300W~1600W
Features :

3-stage charger (PB-300/360), 2/3/8-stage smart charger (PB-600/1000), 3-stage charger in harsh environment (HEP-600C), intelligent charger with programmable 3-stage curve (RPB-1600/RCB-1600) for lead-acid batteries and Li-ion batteries

6 years warranty for HEP-600C, 5 years warranty for RPB-1600/RCB-1600

DC/DC > Module Type- Module Type
>> 1.25" x 0.8" Footprint
Wattage :3W~12W
Features :

On board module type, assemble on the main PCB of the system

Single and dual output models

Model
Single:
SCW03 / SCW05 / SCW08 / SCW12
Dual:
DCW03 / DCW05 / DCW08 / DCW12
>> 2" x 1" Footprint
Wattage :5W~50W
Features :

On board module type, assemble on the main PCB of the system

Single and dual output models

Model
Single:
SLW05 / SKE10 / SKA15 / SKA20 / SKM30 / SKM50
Dual:
DLW05 / DKE10 / DKA15
1"x1":
SKM15
>> 2" x 2" Footprint
Wattage :15W~60W
Features :

On board module type, assemble on the main PCB of the system

Single, dual, triple output models

Model
Single:
SKE15 / SDM30 / SKA40 / SKA60
Dual:
DKE15 / DKA30
Triple:
TKA30
>> DIP Package
Wattage :0.5W~1W
Features :

On board module type, assemble on the main PCB of the system

Regulated and unregulated models

Model
Regulated:
       SRS
Unregulated:
       SUS01 / SMA01
>> Half-brick
Wattage :75W~150W
Features :

Half-brick size (2.28” x 2.4” x 0.5”) with industry standard pin out

Dual in line package

2:1 wide input•1500VDC I/O isolation

Built-in remote ON/OFF and remote sense

2.5V / 3.3V / 15V output available

Optional heat sink available

Model
MHB75 / MHB100 / MHB150
>> SIP Package
Wattage :1W~5W
Features :

On board module type, assemble on the main PCB of the system

Regulated and unregulated models

Model
Unregulated:
       SMU01 / SMU02 / SPU02 / SPU03
>> SMD Package
Wattage :1W
Features :

On board module type, assemble on the main PCB of the system

Single, dual, triple output models

Model
Single:
SBT01 / SFT01
Dual:
DET01
DC/DC > On Board Type - On Board Type
>> NID Series
Wattage :30W~60W
Features :

Non-isolated (NID30/60)

3:1 wide input range for 5~15V models

High efficiency up to 96% (NID30/60)

Built-in remote ON/OFF control (NID30/60)

Economical open frame design

Model
NID30 / NID60
>> NSD Series
Wattage :5W~15W
Features :

4:1 wide input range

1000VDC I/O isolation (1500VDC for NSD-15)

Built-in EMI filter

Built-in remote ON/OFF contro

Low cost, high reliability

Model
DC/DC > PCB Type - PCB Type
>> PSD Series
Wattage :5W~45W
Features :

2:1 wide input range

I/O isolation : 2000VAC for 5W/15W, 1500VAC for 30W/45W

Model
DC/DC > Enclosed Type - Enclosed Type
>> RSD Series
Wattage :100W~300W
Features :

Compliance with EN50155 and EN45545-2 railway standard

2:1 wide input range

Isolation: 4000VDC

1U low profile

Hald encapsulated

Model
>> SD Series
Wattage :15W~1000W
Features :

2:1 wide input range (4:1 for SD-500/1000)

I/O isolation : 1500VAC (2000VAC for SD-15/500/1000)

1U low profile (41mm) for SD-1000

12V/0.25A auxiliary output for SD-500/1000

Built-in remote ON/OFF control and remote sense for SD-500/1000

Model
DC/AC > Modified Sine Wave-
>> A301/303 Series
Wattage :100W~2500W
Features :

Modified sine wave output, suitable for resistive load

Low cost

1 year warranty

DC/AC > True Sine Wave -
>> IRC Series
Wattage :
Features :

Remote controller for TS-700~3000 , TN-1500~3000

Model
IRC1 / IRC2 / IRC3
>> TN Series
Wattage :1500W~3000W
Features :

True sine wave with solar charger & by-pass function

High surge power up to 200%

Output voltage / frequency adjustable

Conformal coating

Computer-based monitoring software, recommended for Windows 7 and Windows 8 Operating System (English and Chinese version)

3 years warranty

Model
>> TS Series
Wattage :200W~3000W
Features :

True sine wave output, suitable for motor related applications

High surge power up to 200%

Output voltage / frequency adjustable

Conformal coating (except for TS-200/400)

3 years warranty

Model
DC/AC > Solar Inverter - Solar Inverter
>> ISI Series
Wattage :500W
Features :

ISI-500: Modified sine wave with MPPT solar charger

ISI-501: True sine wave with MPPT solar charger

High surge power up to 200%

2 years warranty (ISI-500), 3 years warranty (ISI-501)

Model